icmGlobalNews A Press Release from International Communications & Marketing - ICM

Press Release for AMETEK Process Instruments

Editor: We value your feedback. Please use this form to confirm if you plan to publish.

If you publish, please send us a clip or copy of the issue. See addresses and note at end of release.
Thanks!

A. B.

Captions at end of release. Click on image to download high resolution file.
Copy and paste text below. Text available in other languages at www.icmGlobalNews.com.

NEXT GENERATION SULFUR TAIL GAS ANALYZER
BOOSTS RELIABILITY AND SAFETY IN CLAUS RECOVERY PROCESS

New AMETEK Process Instruments Model 888 features
automatic flow control and extended temperature range

AMETEK Process Instruments (www.ametekpi.com) has introduced its third generation H2S/SO2 tail gas analyzer with significant reliability advances for control of the Claus sulfur recovery process. New features of the Model 888 Sulfur Recovery Tail Gas Analyzer overcome the three most common external failure modes encountered by Sulfur Recovery Units (SRU). These include:

  • Automatic flow control for proactive response to adverse process conditions such as liquid entrainment during SRU (sulfur recovery unit) turndown
  • Flange temperature alarm to give early warning of poor steam quality or defunct steam trap to prevent sample flow failure
  • Extended ambient temperature range to 60°C/140°F without external cooling to increase the life of electronics and allow installation in the hottest climates

Applications include:

  • Oil refining
  • Gas
  • Petrochemical & chemical refining
  • Steelmaking
  • Engineering procurement construction
  • Pollution control

Safety advances include double-block process isolation and a web-enabled interface for remote data acquisition by Ethernet and Modbus. The Model 888 features the AMEVision color graphical user interface and smart diagnostics. Extensive self diagnostics monitor six temperatures and four separate pressures, with automatic adjustments in process flow. The analyzer also is equipped with steam (hot condensate) blowback to remove ammonia salts and an anti-clogging feature that  is automatically initiated if plugging is detected.

The analyzer uses the proven sample handling technique of an internal demister with two demister pads and face-to-face fittings allowing improved access and maintenance efficiency. All internal connections and components are accessible from the front of unit. The compact, rugged analyzer mounts directly on the process pipe, eliminating the complexity of fiber optic coupled photometers or sample lines.

Since the Model 888 occupies the same footprint and uses the same process connection as its predecessor, Model 880, the new unit can be substituted in less than a day. Its stainless steel housing is rated IP65/NEMA 4X for harsh outdoor operating conditions; a shelter cabinet or house is not required.

A leader in process analysis for sulfur recovery systems, AMETEK Process Instruments has more than 1,100 installed analyzers with over 100 million hours of run time.

AMETEK Process Instruments is a leader in the design and manufacture of a broad range of on-line analytical instrumentation with the industry’s most extensive product line, offering analyzers based upon eleven differentiated technology platforms. It is a unit of AMETEK, Inc., a leading global manufacturer of electronic instruments and electromechanical devices with annualized sales of more than US$4.2 billion.

Photo Caption:
Click on image to download high resolution file.
A. New sulfur recovery tail gas analyzer from AMETEK Process Instruments overcomes most common external failure modes.
B. Model 888 analyzer significant reliability advances for control of the Claus sulfur recovery process.

Editors Note:  Please confirm if you plan to publish this release using the form above or email.
If you publish, please send clip or issue to:  email – plishman@icmglobalnews.com or: hardcopies  – International Communications & Marketing, PO Box 185, Stone Ridge, NY  12484 USA.   Thanks!

Product Sales Contact:
Russia
Jochen Geiger
AMETEK GmbH
Tel: +49-2159-9136-0
email Jochen.Geiger@ametek.de

UK
Jochen Geiger
AMETEK GmbH
Tel: +49-2159-9136-0
email Jochen.Geiger@ametek.de

Germany
Axel Lehnen
AMETEK GmbH
e-mail:  Axel.Lehnen@ametek.de
Tel: +49-2159-9136-0

China
Rubin Huang
AMETEK Commercial Enterprise (Shanghai)
Tel: +86-21-5868-5111
email Rubin.Huang@ametek.com

Japan
Stephane Cappe
AMETEK Process Instruments SAS
Tel: +33-1-30-68-89-20
Stephane.cappe@ametek.com

India
AMETEK Process Instruments
Anantha Kukkuvada
e-mail: Anantha.Kukkuvada@ametek.com
Tel:  +91-80-6782-3200

Latin America
Pedro Gutierrez
AMETEK Process Instruments
Tel: +1 713 466 4900 x6731
pedro.gutierrez@ametek.com

Brazil
Marcelo Moura
AMETEK Process Instruments
Tel +55 19 2107-4106
marcelo.moura@ametek.com